Advantages of plexiglass cutting machine
Oct 16, 2018

Cutting of thick material (10-20mm): The plexiglass of 10mm or more generally adopts a 75mm focusing mirror, the plexiglass of 25mm or more uses a 100mm focusing mirror, and the deepest can cut 32mm plexiglass. 10mm plexiglass cutting: the cutting speed is generally 0.08-0.12 m / min, the light intensity is 60-70%. The most stable light at 60% light intensity, the air leakage jet adjusts the air flow to make the edges smoother. Because the blower is larger, the melted object is blown back to the plexiglass by the auxiliary high pressure gas to form a matte surface. Try to turn the wind down. Sometimes, customers need to add paper or film cutting, then the wind can not be too small, otherwise it will catch fire.

Cutting of thin material (2-10mm): plexiglass below 5 mm adopts 50mm focusing mirror, the cutting speed is generally 0.35-0.8 m/min, the light intensity is 45-65%, and the 5-10mm plexiglass is generally 63.5 mm. Focusing mirror, the cutting speed is 0.15-0.3 m / min, the light intensity is 50-75%, large-area engraving machine, if the serious resonance (vibration) occurs during engraving, the precision of the engraving machine will be greatly reduced. Therefore, the size of the cut plexiglass model should not exceed 1 meter, and some white powder will be produced during the process of plexiglass engraving of the characters, so that it feels clearer. If it is finished with water, it will be more blurred.


Related Industry Knowledge

CONTACT US
Copyright © Olsoon Materials Co.,Ltd. All Rights Reserved.